Sorption of DDTs on biofilms, suspended particles and river sediments: effects of heavy metals

The sorption by solid materials is one of the most important processes that affect the fate of hydrophobic organic pollutants in aquatic systems. Current studies focus on the sorption of hydrophobic pollutants by single natural solid material, whereas few studies compared the sorption behaviors of different solids. Furthermore, natural aquatic environment is a complex system where hydrophobic pollutants coexist with many other pollutants, but only limited studies reported the effects of coexisting components on the sorption. Here we studied the sorption of dichlorodiphenyltrichloroethanes (DDTs) by three common solids in natural water, i.e., biofilms, suspended particles and sediments. The effects of typical coexisting heavy metals on the sorption were also examined. The results show that the sorption is described by a dual-mode sorption model. Compared with sediments, more DDTs were sorbed by biofilms and suspended particles. Coexisting Pb, Cd and Cu increased the sorption of DDTs on sediments while decreasing the sorption on biofilms slightly, with little effect on the sorption on suspended particles. The different sorption behaviors of the solids were mainly determined by the composition of the solids: more organics were observed in biofilms and suspended particles.     

南海球形棕囊藻质体16SrDNA序列分析

测定了采自香港2株球形棕囊藻和湛江1株等鞭金藻质体16SrDNA基因序列,结合GenBank中下载的32条同源序列,分析序列特征并构建分子系统树。发现600bp序列中有可变位点42个,简约信息位点33个,可变位点和简约信息位点分别为全序列的7．0％和5．5％。A＋T的含量（52．5％）略大于C＋G含量（47．5％）,与已报道的棕囊藻属叶绿体和线粒体基因相似;在分子系统树上,同属藻种聚类在一起,属间遗传距离分别为0．0255-0．0503。棕囊藻属属内遗传距离0-0．0050,不同藻种相混杂,并未独立成支;质体16srDNA部分序列虽不能区分棕囊藻属内不同藻种,但能鉴定出GenBank中27个环境样品为棕囊藻属藻株,从而能确定其地理分布和相对丰度,对棕囊藻赤潮的预测预报具有重要意义。质体16srDNA在其他赤潮藻类物种鉴定方面的应用需要进一步研究。     

单兵用主动式听力保护技术研究现状分析

战场噪声是造成单兵听力损伤的重要原因,通常要求单兵处于大于85dBA的噪声环境中需佩戴听力保护装置。听力保护装置通常包括耳罩式和耳塞式。新型单兵用耳塞式听力保护装置具有听力保护、环境声音的监听、持续及脉冲噪声抑制、通信接入等多种功能。     

广西冻雨气候及天气形成的机理分析

利用广西1952-2008年57年每年11月至下一年3月89个市县级台站地面报表资料和NCEP资料,对广西近20年来冻雨的多年空间分布特征和主要影响系统、温度、水汽等特征进行了探讨。结果表明:冻雨发生的周期是6～7年,基本发生在广西23°N以北区域。冻雨分布图上24～25°N有3个高值中心,这3个中心和地形图上3个高值中心基本重合。月平均温度10°N以内区域为冻雨易发区。广西冻雨天气主要有两种类型:阻塞型和两槽一脊型。阻塞型比两槽一脊型一般来说,冻雨维持时间更长。风场结构,上南风、下北风的层结结构加上中低层水汽发展旺盛,是广西冻雨形成的一个条件。在垂直方向,逆温层的存在是冻雨发生的关键。     

A review of gas-phase chemical mechanisms commonly used in atmospheric chemistry modelling

The atmospheric chemical mechanism is an essential component of airshed models used for investigating the chemical behaviors and impacts of species. Since the first tropospheric chemical mechanism was proposed in the 1960s, various mechanisms including Master Chemical Mechanism (MCM), Carbon Bond Mechanism (CBM), Statewide Air Pollution Research Center (SAPRC) and Regional Atmospheric Chemistry Mechanism (RACM) have been developed for different research purposes. This work summarizes the development and applications of these mechanisms, introduces their compositions and lumping methods, and compares the ways the mechanisms treat radicals with box model simulations. CBM can reproduce urban pollution events with relatively low cost compared to SAPRC and RACM, whereas the chemical behaviors of radicals and the photochemical production of ozone are described in detail in RACM. The photolysis rates of some oxygenated compounds are low in SAPRC07, which may result in underestimation of radical levels. As an explicit chemical mechanism, MCM describes the chemical processes of primary pollutants and their oxidation products in detail. MCM can be used to investigate certain chemical processes; however, due to its large size, it is rarely used in regional model simulations. A box model case study showed that the chemical behavior of OH and HO₂ radicals and the production of ozone were well described by all mechanisms. CBM and SAPRC underestimated the radical levels for different chemical treatments, leading to low ozone production values in both cases. MCM and RACM are widely used in box model studies, while CBM and SAPRC are often selected in regional simulations.     

粤港澳大湾区典型化工场地苯系物污染特征及迁移规律

以粤港澳大湾区某典型化工污染场地为例,共采集了247个土壤样品和20个地下水样品,探讨了场地苯系物的污染分布特征,利用GMS分别从水平和垂直方向模拟分析了该场地苯系物在土壤与地下水的污染迁移扩散规律.结果表明,场地土壤样品中苯、乙苯、间,对-二甲苯、邻-二甲苯超筛选值,其中苯系物超筛选值的土壤样品主要集中在0. 5～4 m深度范围;地下水样品中苯、乙苯、间,对-二甲苯和邻-二甲苯超标较严重,最大超标倍数分别为140. 00、101. 33、212. 00和103. 40倍,主要分布在浅层地下水.地下水中的苯污染物在水平方向主要以对流/弥散运移方式从西北往东南方向迁移,而在垂向上浮苯主要集中在地下水面处,溶解态苯主要在水动力作用下迁移.模拟验证分析结果表明,MT3D模型能较准确地反映场地苯系物的空间分布和迁移特征,可为粤港澳大湾区化工类污染场地的精准化管控与修复提供科学指导.     

垃圾填埋场渗滤液浓缩液高级氧化组合技术研究

以深圳市某生活垃圾填埋场渗滤液纳滤浓缩液为研究对象,采用"混凝沉淀+高级氧化+A/O"组合技术处理浓缩液.结果表明:混凝沉淀对浓缩液COD、总氮的去除效率分别为62％、48％;高级氧化对混凝沉淀出水COD、色度去除效率分别为71％、99％,对总氮无明显去除效果;A/O深度处理工艺对高级氧化出水COD、总氮平均去除效率分别为26％、28％.整体工艺可去除浓缩液92％的COD以及63％的总氮.     

嗜水气单胞菌强化老化纳米零价铁去除水中Cr(VI)

基于老化对纳米零价铁（NZVI）去除水中Cr（VI）的不利影响,本研究考察了接种嗜水气单胞菌（Aeromonas hydrophila）强化老化NZVI对水中Cr（VI）的去除,并分析了溶解氧、温度、pH、Cr（VI）初始浓度对其去除Cr（VI）的影响,同时利用扫描电镜（SEM）、X射线光电子能谱（XPS）等分析了反应前后材料的形貌特征及Cr的价态变化.结果表明,接种嗜水气单胞菌能显著提高无氧条件下老化NZVI对Cr（VI）的去除效果,且在酸性条件和30~40 ℃条件下去除效果较好,可能是因为该条件下更有利于老化NZVI的腐蚀和微生物的生长,此外,Cr（VI）去除效率随Cr（VI）初始浓度升高而降低.在pH=6,温度为30 ℃,老化nZVI投加量为0.1 g·L^-1,Cr（VI）初始浓度为50 mg·L^-1的条件下反应24 h后,Cr（VI）的去除率可达到100%.XPS分析表明,反应后NZVI表面沉积的Cr主要以Cr（III）的形式存在,可能为Cr（OH）₃沉淀或Fe_xCr_1-x（OH）₃共沉淀物.动力学研究发现,Cr（VI）去除过程符合准二级动力学,去除机制为Cr（VI）的吸附、还原与共沉淀,其中以还原作用为主.     

Effective adsorption of quadrivalent cerium by synthesized laurylsulfonate green rust in a central composite design

The layered laurylsulfonate intercalated green rust (lauryl-S GR) was synthesized to evaluate the influence of synthesis parameters and aqueous conditions on the adsorption of Ce^IV. The maximum adsorption capacity of 305.58 mg/g by lauryl-S GR was predictably obtained. The pseudo-first-order kinetic model was appropriate in fitting the whole uptake process in a weak acid environment. Three isotherm models including Langmuir, Freundlich, and Tempkin were all reliable in depicting the isotherm adsorption process. The maximum monolayer adsorption capacity of lauryl-S GR towards Ce^IV was 315.46 mg/g. Ce species including CeO and Ce₂O₃ besides CeO₂ were matched in the XPS distribution, directly indicating the reduction reaction brought by Fe^II in the GR occurred to hydrated Ce^IV ions during the adsorption. Nano-sized Ce particles attached to the lauryl-S GRs after the adsorption experiments were observed in the morphological characterization. Flocculated materials were formed on the surface of the lauryl-S GR at a pH of 7, which further reduced the active sites and disrupted the continuous uptake of Ce^IV to the lauryl-S GR. This study expands the application of GRs and supplies an ideal iron-based material for the construction of the affiliated recovery pathway to the traditional separation of Ce.     

Synthesis and evaluation of cationic flocculant P(DAC-PAPTAC-AM) for flocculation of coal chemical wastewater

In this study, a high-efficiency cationic flocculant, P(DAC-MAPTAC-AM), was successfully prepared using UV-induced polymerization technology. The monomer Acrylamide (AM): Acryloxyethyl Trimethyl ammonium chloride (DAC): methacrylamido propyl trimethyl ammonium chloride (MAPTAC) ratio, monomer concentration, photoinitiator concentration, urea content, and cationic monomer DAC:MAPTAC ratio, light time, and power of high-pressure mercury lamp were studied. The characteristic groups, characteristic diffraction peaks, and characteristic proton peaks of P(DAC-MAPTAC-AM) were confirmed by fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), ¹H nuclear magnetic resonance spectrometer (¹H NMR), and scanning electron microscopy (SEM). The effects of dosage, pH value, and velocity gradient (G) value on the removal efficiencies of turbidity, COD, ammonia nitrogen, and total phenol by poly aluminum ferric chloride (PAFC), P(DAC-MAPTAC-AM), and PAFC/P(DAC-MAPTAC-AM) in the flocculation treatment of coal chemical wastewater were investigated. Results showed that the optimal conditions for the flocculation of coal chemical wastewater using P(DAC-MAPTAC-AM) alone are as follows: dosage of 8–12 mg/L, G value of 100–250 s ^? 1, and pH value of 4–8. The optimal dosage of PAFC is 90–150 mg/L with a pH of 2–12. The optimal dosage for PAFC/P(DAC-MAPTAC-AM) is as follows: PAFC dosage of 90–150 mg/L, P(DAC-MAPTAC-AM) dosage of 8–12 mg/L, and pH range of 2–6. When P(DAC-MAPTAC-AM) was used alone, the optimal removal efficiencies of turbidity, COD, ammonia nitrogen, and total phenol were 81.0%, 35.0%, 75.0%, and 80.3%, respectively. PAFC has good tolerance to wastewater pH and good pH buffering. Thus, the flocculation treatment of coal chemical wastewater using the PAFC/P(DAC-MAPTAC-AM) compound also exhibits excellent resistance and buffering capacity.